Monopolar Cable 4mm Female to Male Connector

Monopolar Cable 4mm Female to Male Connector

A monopolar cable 4mm female to male connector that transmits the current required for cutting and coagulation during surgery between an electrosurgical generator and a monopolar handpiece or instrument. It is designed for biomedical equipment teams and hospitals and clinics that require a dependable, low resistance connection that they can rely on during a live procedure.

Key Features & Benefits

• 4mm female to male configuration: It is a 4mm size, which most of the electrosurgical units and handpieces in Pakistan use, and operating room staff don’t need to use any adapter while operating the handpiece. The monopolar cable 4mm female to male connector fits this common configuration. 
• Silicone insulated core: Is not prone to cracking of the jacket when repeatedly autoclaved, as in a reprocessing facility.
• Low resistance copper conductor: This eliminates energy loss along the conductor length, and thus there will be no fluctuation of energy at the surgeon’s tip. The monopolar cable 4mm female to male connector supports consistent energy delivery during electrosurgery. 
• Reinforced strain relief at both ends: Cables are most vulnerable to damage from daily use at the connector points. Reinforced ends mean less breakage and premature replacement of the 4mm female to male monopolar cable connector.
• Flexible, kink resistant sheathing: Remains flexible and pliable after cold sterilization cycles or when stored in colder conditions in store rooms of Pakistani hospitals during winter. The monopolar cable 4mm female to male connector remains suitable for regular OT use. 
• Compatible with standard monopolar electrosurgical generators: Is compatible with the most popular brand of generators in the local operating room, and the monopolar cable 4mm female to male connector is not designed to be wired to a generator. 

All of these address real, daily issues associated with OT staff and biomedical engineers; shorten mid case interruptions, reduce cable changeouts, and make current delivery safer with the monopolar cable 4mm female to male connector.

Who Should Buy This / Use Cases

This cable is suitable for hospitals, surgical centres, or other facilities that conduct electrosurgery operations every day, particularly in urban areas where there is a high risk of voltage fluctuation and unstable power supply. Cable life is also reduced by heat and repeated autoclaving, which is why it is important to have spares of the monopolar cable 4mm female to male connector in a biomedical engineering department with multiple operating theatres.

For private clinics that perform minor surgical or gynecological procedures, a reliable 4mm connector is a must as a common replacement part and not a whole new handpiece assembly. This is a reorder item for some distributors providing OT consumables to smaller district hospitals.

Why Choose Capasee Electro Medical Engineering?

Capasee Electro Medical Engineering provides and services electro medical accessories to clinics and hospitals throughout Pakistan and has first hand experience of what is not working in the OT every day, rather than what the spec sheet says. The monopolar cable 4mm female to male connector is supplied for facilities that need a practical replacement accessory.

Because when a cable fails, instead of having to wait for a shipment from overseas, Capasee has the connector on hand to replace it. Local after sales support. When things go wrong, faulty units can be replaced or checked out with ease, which is important when an operating theatre schedule will not wait.

FAQ’s

What is the maximum current capacity of 4mm cable?

A typical electrosurgical generator output of a few hundred milliamps to a few amps (depending on the setting) is compatible with a standard 4mm monopolar connector and always matches the output of each particular electrosurgical generator setup with its rated output connector.

What is the maximum length of cable?

Monopolar cables are generally available in lengths of approximately 2 metres to 4 metres, the most popular length in operating rooms being 3 metres.

What size breaker for a 4mm cable?

There is no need for a dedicated breaker for the cable, as it is connected to the electrosurgical generator, which is protected by the facility’s power supply and the generator’s internal fuse. 

What is the primary function of this cable?

Conducts electrosurgical current from the generator to the monopolar handpiece, thus completing the circuit required for cutting or coagulation during the procedure. 

What do the male and female ends connect to?

The female end is inserted into the output socket of the electrosurgical generator, and the male end is inserted into the electrosurgical monopolar handpiece or instrument. 

Is the cable reusable?

Yes, this type of cable is reusable and can be autoclaved between procedures, but should be inspected periodically for signs of insulation wear. 

What is the standard length?

The most popular standard length is 3 metres, but shorter or longer may be ordered. 

Get This Cable for Your Facility

Need a dependable 4mm Monopolar Cable Female to Male Connector for your operating theatre? Call Capasee Electro Medical Engineering today to see if they have it in stock, confirm compatibility with your generator, and place your order for the monopolar cable 4mm female to male connector.