Push Button Control Switch

Push Button Control Switches for Industrial and Commercial Use in Pakistan

A push button control is a manual switching device that allows the manual start, stop, or control of machinery or electrical circuits by pushing a button. It has been designed for factory operators, technicians, and facility managers who require reliable control in the most challenging environments in Pakistan.

Key Features and Benefits

• Rugged construction for local conditions: The housing will be rugged to withstand the local conditions, especially during the summer in Pakistan when equipment panels are often placed in poorly ventilated rooms.
• Momentary and maintained contact options: If the logic of your machine requires momentary action for running the conveyor or maintained action for a continuous run circuit, use momentary or maintained contacts, respectively, with push button control.
• Color coded actuators (red, green, yellow, black): This helps the operators to immediately identify the stop, start, and reset functions, thus eliminating operational mistakes on the shop floor.
• IP65 rated versions available: These push button control units will be suitable for workshops where oil, moisture, or airborne dust is prevalent, which enhances the working life of the switch. 
• Screw terminal wiring: Allows easy installation and maintenance for local electricians without special tools.
• Compatible with 22mm and 16mm panel cutouts: It comes in standard industrial control panel sizes which are already used in the industry in Pakistan, thus replacement would not require any redesign of the control panel.
• Rated for standard voltage fluctuation: Push button control is designed to withstand voltage fluctuations that can occur with grid power and generator backups, preventing premature failure. 

Who Should Buy a Push Button Control?

Switches that can repeatedly handle switching power on and off without degradation are required for factory owners with a production line that is subjected to frequent load shedding using push button control. During an outage when the generator changeover panels are used, facility managers depend on push button control to switch from the power grid to the generator.

These are used on a daily basis by the workshop supervisors in Lahore, Karachi, Faisalabad, and Sialkot on lathes, compressors, and packaging machines with push button control. Office and building maintenance staff also rely on push button control for backup power systems, pump motors, and exhaust fans, where a physical and tactile control is safer than a touch screen interface.

Why Choose Capasee Electro Medical Engineering

For years, Capasee Electro Medical Engineering has been providing the electrical control components to the industrial and institutional market of Pakistan and has had practical experience in areas where equipment can’t afford to be down. 

All push button controls were tested before dispatch, and the team offers easy after sales support for units to be replaced or troubleshot. When a production line is waiting for a part, buyers receive hands on technical advice without having to go through a call centre.

Frequently Asked Questions

What is a push button switch used for?

A push button control is a manual input device that initiates a signal to start, stop, or change the state of a connected circuit or motor when activated by a pressing motion.

What is a push button control?

A push button control is a manual input device that sends a signal to start, stop, or change the state of a circuit and/or a motor when it is pressed. 

What are the two types of push button switches?

There are two general types, momentary push buttons that only come on when pressed and maintained push buttons that remain in place until they are pushed once again. 

What is the concept of push button switch?

The concept is very simple, the button is pressed to close or open an internal contact; the circuit on the contact is closed or opened. 

What is the difference between a push button switch and a normal switch?

A push button resets to its previous state when released, except where it is a maintained button, and a normal toggle switch will remain in its last state when it’s released.

What is a push button used for?

It is used wherever a slow, deliberate manual operation is required, such as starting a motor, alarming, or stopping equipment in an emergency. 

Get in Touch

Contact Capasee Electro Medical Engineering for pricing, specifications, or bulk orders of push button control switches. We can assist you with choosing the appropriate type of panel and application.