Advanced HF-100 CT Bipolar Coagulation Unit for Skin Surgery
A small HF-100 CT bipolar coagulation unit is a bipolar electrosurgical coagulation generator designed for use in hospitals or surgical clinics, providing stable, adjustable output and accurate tissue coagulation in variable power situations.Â
Specifications:
- Output mode: Bipolar coagulation only
- Power output: 0–70W, adjustable
- Operating frequency: 400 kHz
- Input voltage range: 180 to 260V AC (stabilized against grid fluctuation)
- Display: Digital power level indicator
- Activation: Foot pedal and hand switch compatible
- Safety features: Overload cutoff, short circuit protection, low output alarm
- Dimensions: 300 x 250 x 120 mm
- Weight: Approx. 3.5 kg
- Warranty: 1 to 2 Years
Bipolar Electrosurgical Forceps | Capasee
Surgical bipolar electrosurgical forceps that are reusable and precise for the controlled grasping and electrosurgical coagulation of tissue. Ideal for ENT, gynaecology, general surgery, and laparoscopy, where accurate hemostasis with minimal thermal spread is required using bipolar electrosurgical forceps.Â
Specifications:
- Material: Surgical grade stainless steel
- Tip Type: Straight/curved/bayonet (available in multiple configurations)
- Insulation: Fully insulated shaft to prevent current leakage
- Compatibility: Works with standard bipolar electrosurgical generators
- Sterilization: Autoclavable, reusable up to multiple sterilization cycles
- Length: Available in standard OT lengths (typically 180–200 mm)
- Handle: Ergonomic grip for reduced fatigue during long procedures
- Current Path: Bipolar (current flows only between tips, no patient return pad needed)
- Application: Cutting, coagulation, and precise hemostasis in open and minimally invasive surgery
Bipolar Foot Switch for Electrosurgical Use | Capasee
Electrosurgical generators with a pedal operated control device activate the bipolar cutting and coagulation modes without the operator having to leave the operating field, making the bipolar foot switch an essential control accessory during surgical procedures.Â
Specifications:
- Type: Dual pedal bipolar activation (separate cut and coagulation controls)
- Housing: Sealed, spill and fluid resistant casing for OT environmentÂ
- Base: Non slip rubberized underside for stability on smooth floorsÂ
- Switch rating: High cycle microswitches used every day during clinical operationsÂ
- Connector: Standard compatibility with common electrosurgical generator ports
- Design: Low level, compact footprint to reduce OT floor clutter
- Build: Designed to operate for extended periods and multiple operations as needed
- Bipolar Foot Switch for Electrosurgical Use
Bipolar Forceps Cable | Electrosurgical Unit Accessory
A connecting accessory that can be used in hospitals and surgical centres with electrosurgical generators and is reliable. Designed for reliable current transfer, safety, and long term use with repeated sterilization cycles in a Pakistani OT setting using an electrosurgical unit accessory.Â
Specifications:
- Material: Medical grade silicone insulated with a copper conductor core for safety.
- Compatibility: Standard and generator specific connectors are both compatible.
- Sterilization: Autoclavable, steam sterilization compatible
- Length options: 2m / 3m / 5m
- Connector type: Standard OT compatible plug (universal or brand specific on request)
- Durability: Reinforced strain relief at connector ends to eliminate wire fatigue
- Use environment: Hospital OTs, Clinics, Surgical Centres
- Warranty: 1 to 2 years
Bipolar Forceps Cable for Electrosurgery
A cable with a bipolar forceps cable attachment is to be used with the electrosurgical generator for the exactness of tissue coagulation during surgery. Constructed with autoclave safe insulation and a rugged connector for daily use in the OT.Â
Specifications:
- Type: Bipolar electrosurgical cable
- Connector: Dual pin bipolar connector (standard fit for major generator brands)
- Cable Length: 3 meters (approx.)
- Insulation Material: Medical grade silicone
- Sterilization: Autoclavable up to 134°C
- Reusability: Can have multiple sterilization cycles because it is reusableÂ
- Compatibility: Standard bipolar forceps and electrosurgical generators
- Voltage Rating: Electrosurgical generator output stable with varying input powerÂ
- Packaging: Individually packed, sterile/non sterile availableÂ
- Country of Origin/Supply: Pakistan (locally supported by Capasee Electro Medical Engineering)
Bipolar Hand Controller
Switching accessories for bipolar electrosurgical generators with hand operation. It allows the surgeon to control coagulation or cutting from the hand piece without the need for a foot pedal, allowing for a more focused operation with a reliable bipolar hand controller solution.Â
Specifications:
- Type: Bipolar hand activated control switch
- Compatibility: Standard bipolar electrosurgical generator interface
- Activation Mode: Manual push button (coagulation/cutting)
- Housing Material: Medical grade, autoclavable
- Sterilization: Autoclave compatible
- Cable: Durable, flexible, high cycle rated jacket
- Power Stability: Reliable performance under fluctuating voltage conditions
- Grip Design: Lightweight, ergonomic for extended procedure use
- Manufacturer: Capasee Electro Medical Engineering
ECG Electrodes
Single use electrodes for the recording of the ECG, for stress tests, and for continuous cardiac monitoring, which are attached by adhesive. Stable skin contact and low noise signal transmission for hospital, clinic or home care with reliable ECG electrodes.Â
Specifications
Sensing element: Silver/silver chloride (Ag/AgCl) Type: Disposable, single use Adhesive: Medical grade hydrogel Backing material: Hypoallergenic foam or cloth Packaging: Individually sealed, maintain gel's moisture until use Application: 12 lead ECG, stress testing, Holter monitoring Compatibility: Standard ECG machines and monitoring leads Storage condition: Cool, dry place away from direct heat and sunlight Shelf life: 1 to 3 years from manufacture (refer to batch label) Skin suitability: Suitable for adult and pediatric use (confirm sizing for pediatric patients)
Electrosurgical Pad | Medical Patient Return Plate
Return electrode for monopolar electrosurgical use, designed for single use as an electrosurgical pad. It can cover the existing path safely between the patient and the electrosurgical generator and thus reduce the risk of burns during surgery with an electrosurgical pad.Â
Specifications:
- Type: Split pad, REM (Return Electrode Monitoring) compatible
- Material: Latex free, hypoallergenic adhesive gel
- Backing: Flexible, conformable non woven backing
- Adhesive: Conductive hydrogel with strong, skin safe tack
- Sterility: Individually sealed, single patient use
- Shelf life: Typically 2–3 years from manufacture (check batch label)
- Compatibility: Works with standard monopolar electrosurgical generators
- Packaging: Available in boxes for bulk hospital/clinic ordering
ESU Foot Switch for Electrosurgical Units | Foot Pedal Controller
A dual pedal foot control that is used in conjunction with electrosurgical units to turn them on and off during surgery without using your hands. The ESU foot switch is intended for repeated use in hospital and clinic operation theatres.Â
Specifications:
Type: Dual pedal (Cut / Coagulation) Compatibility: Standard ESU generator input, compatible with common electrosurgical units Housing: Sealed, spill and fluid resistant construction Base: Non slip rubber base for stable floor grip Cable: Reinforced, heavy duty cable resistant to cracking Connector: Standard pinout for direct plug in, no modification needed Activation: Firm tactile press point to prevent accidental triggering Usage environment: Designed for daily, high frequency OT use
HF-300 CT Electro Surgical Unit | Capasee
High frequency electrosurgical generator for cutting and coagulation for general surgery, gynaecology, and ENT procedures. Designed to withstand the fluctuations in Pakistan's power supply, it allows surgeons to maintain consistent output even as the power supply fluctuates without placing strain on equipment as found in standard imported units. The HF-300 CT electro surgical unit is developed to support reliable surgical performance in challenging power conditions.Â
Specifications:
- Output modes: Pure cut, blend cut, coagulation (monopolar and bipolar)
- Power output: 300W cut / 120W coagulationÂ
- Operating frequency: 400 kHz–1 MHz (confirm exact spec)
- Input voltage: 220-240V AC, featuring stable voltage in case of input voltage fluctuations.
- Patient circuit: Isolated, monitoring return electrode
- Display: LED power/mode indicator and audible power activation alert
- Footprint: Compact benchtop design, suited for space limited OTs
- Certification: Â CE, ISO 13485Â
- Warranty: 2 Years
Laparoscopic Electrode for Electrosurgical Use
Surgical tool that is used with an electrosurgical unit (ESU) in a laparoscopic procedure to cut, coagulate and dissect tissue. This laparoscopic electrode delivers energy with minimal thermal spread for precise delivery, leading to safer, faster surgical outcomes in general, gynecological, gall bladder and hernia laparoscopy.Â
Specifications:
- Type: Monopolar / Bipolar (specify as applicable)
- Shaft Length: 330 mm / 450 mm (common OT sizes)
- Shaft Diameter: 5 mm
- Tip Style: Hook, spatula, or L hook (per procedure requirement)
- Insulation: Full length shaft insulation to prevent stray current leakage
- Material: Surgical grade stainless steel
- Compatibility: Standard electrosurgical generators (most ESU brands)
- Sterilization: Autoclavable, reusable up to multiple sterilization cycles
- Usage Type: Reusable / Single use options available
- Connector: Standard ESU cable connector
Model HF-250 CT Electro Surgical Unit | Capasee
A small, high frequency electrosurgical generator designed for general surgery, minor and day care surgical use. The Model HF-250 CT Electro Surgical Unit provides consistent cutting and coagulation performance even with a wavering electricity supply, making it a useful option for hospitals and clinics around Pakistan.Â
Specifications:
- Model: HF-250 CT
- Output modes: Cut, Coagulation (blend), Bipolar
- Circuit type: Isolated output, monopolar and bipolar compatible
- Power control: Adjustable output for different tissue types and procedures
- Safety feature: Patient return electrode contact monitoring
- Display: Panel mounted indicators for power level and mode selection
- Power supply tolerance: Designed to handle voltage fluctuation on unstable grid supply
- Build: Compact, theatre ready housing
- Support: Installation, calibration and after sales service by Capasee Electro Medical Engineering