ECG Electrodes
Single use electrodes for the recording of the ECG, for stress tests, and for continuous cardiac monitoring, which are attached by adhesive. Stable skin contact and low noise signal transmission for hospital, clinic or home care with reliable ECG electrodes.Ā
Specifications
Sensing element: Silver/silver chloride (Ag/AgCl) Type: Disposable, single use Adhesive: Medical grade hydrogel Backing material: Hypoallergenic foam or cloth Packaging: Individually sealed, maintain gel's moisture until use Application: 12 lead ECG, stress testing, Holter monitoring Compatibility: Standard ECG machines and monitoring leads Storage condition: Cool, dry place away from direct heat and sunlight Shelf life: 1 to 3 years from manufacture (refer to batch label) Skin suitability: Suitable for adult and pediatric use (confirm sizing for pediatric patients)
Electric Class 3 Portable Ventilator
A small, self contained, battery powered electric Class 3 portable ventilator designed for home use, ambulance transportation, and small clinics with the requirement for reliable respiratory support without the use of an ICU.
Specifications:
- Power Supply: AC mains + built in rechargeable battery backup
- Ventilation Modes: Assist Control, SIMV, Pressure Support
- Tidal Volume Range: Adjustable (adult/pediatric settings)
- Respiratory Rate: Adjustable, typically 5ā40 breaths/min
- FiOā Range: 21%ā100%
- Alarms: Low battery, disconnection, high/low pressure
- Display: LCD with real time monitoring
- Weight: Lightweight, portable design for easy transport
- Battery Backup Time: Several hours of continuous use (protects against load shedding)
- Voltage Tolerance: Built in surge/fluctuation protection
- Warranty: 1 to 2 Years
Electric Hydraulic Operating Table for Hospital Surgery
An electric hydraulic surgical table for medical use in hospitals and clinics, providing precise and stable positioning of the patient for general, orthopedic, gynecological, and urological procedures. Constructed from a corrosion resistant frame and battery backup for use during power outages. The operating table is designed for reliable positioning during a wide range of surgical procedures.Ā
Specifications:
- Adjustment type: Electric hydraulic, foot pedal or hand pendant controlled
- Positioning modes: Trendelenburg, reverse Trendelenburg, lateral tilt
- Height adjustment: Motorized, low to high range for varied surgical needs
- Tabletop: Radiolucent, having an integrated X-ray cassette tray
- Leg sections: Detachable and articulating, supports lithotomy positioning
- Frame material: Stainless steel base, corrosion resistant design
- Upholstery: Cushioning is high density, antibacterial, and easy to clean
- Power backup: Battery backup for backup during power outages
- Mobility: Central locking wheels for stability and easy transport
- Weight capacity: Up to 200 kg
- Warranty: 1 year service warranty with after sales support
Electro Surgical Unit HF-400 CT
The product is a high frequency electrosurgical generator for hospitals and clinics where reliable cutting and coagulation are essential, even in poor power quality. It is compact, trolley mounted and is suitable for general surgery, gynaecology, ENT, and minor OT procedures, with the electro surgical unit HF-400 CT providing dependable performance.Ā
Specifications:
- Modes: Monopolar (cut, coagulation, blend) and bipolar
- Power output: Up to 400W (adjustable per mode)
- Power stability: Output is maintained when the voltage changesĀ
- Safety monitoring: Return electrode contact quality alarmĀ
- Display/indicators: Audible and visual mode confirmation
- Design: Compact, trolley mounted and suitable for smaller OT layouts
- Input supply:Ā From standard AC mains (check with your datasheet for exact voltage/frequency range)
- Included accessories: Return electrode, footswitch/hand switch (confirm exact bundle with your unit)
- Warranty: 2 years
Electro Surgical Unit HF-450 CT
The electro surgical unit HF-450 CT is a high frequency electrosurgery unit designed for cutting and coagulation in general surgery, gynaecology, ENT, and dermatologic surgeries. It is designed to be used in hospitals or clinics where the electrical power supply is not stable, and it provides stable output with safety monitoring, which is built in for daily use during OT.
Specifications:
- Output Modes: Pure Cut, Blend, Coagulation (Fulgurate & Desiccate)
- Power Output: Cut up to 300W / Coag up to 120W (adjustable)Ā
- Frequency: Low neuromuscular stimulation (450 kHz radio frequency)Ā
- Input Voltage Range: 170V to 260V AC (to accommodate local grid variation)Ā
- Safety System: Electrode contact monitoring with audible alarmĀ
- Display: Digital LED/LCD real time power setting displayĀ
- Footswitch Control: Dual pedal for cut and coag activation
- Housing: The trolleys have a compact, small footprint design for use in small OT rooms.
- Certification: CE marked (insert the appropriate certification here)Ā
- Warranty: 1 to 2 Years
Electrosurgical Pad | Medical Patient Return Plate
Return electrode for monopolar electrosurgical use, designed for single use as an electrosurgical pad. It can cover the existing path safely between the patient and the electrosurgical generator and thus reduce the risk of burns during surgery with an electrosurgical pad.Ā
Specifications:
- Type: Split pad, REM (Return Electrode Monitoring) compatible
- Material: Latex free, hypoallergenic adhesive gel
- Backing: Flexible, conformable non woven backing
- Adhesive: Conductive hydrogel with strong, skin safe tack
- Sterility: Individually sealed, single patient use
- Shelf life: Typically 2ā3 years from manufacture (check batch label)
- Compatibility: Works with standard monopolar electrosurgical generators
- Packaging: Available in boxes for bulk hospital/clinic ordering
ESU Foot Switch for Electrosurgical Units | Foot Pedal Controller
A dual pedal foot control that is used in conjunction with electrosurgical units to turn them on and off during surgery without using your hands. The ESU foot switch is intended for repeated use in hospital and clinic operation theatres.Ā
Specifications:
Type: Dual pedal (Cut / Coagulation) Compatibility: Standard ESU generator input, compatible with common electrosurgical units Housing: Sealed, spill and fluid resistant construction Base: Non slip rubber base for stable floor grip Cable: Reinforced, heavy duty cable resistant to cracking Connector: Standard pinout for direct plug in, no modification needed Activation: Firm tactile press point to prevent accidental triggering Usage environment: Designed for daily, high frequency OT use
European Bipolar Forceps Bayonet
The European Bipolar Forceps Bayonet is an electrosurgical reusable forceps with a bent shaft designed for a very specific application of precision coagulation in deep and narrow surgical fields. The offset design allows the surgeon to see the tip, and bipolar action restricts heat to adjacent tissue. Hospitals, clinics, and distributors in Pakistan can get it from Capasee Electro Medical Engineering.
Specifications:
- Type: Bipolar coagulation forcepsĀ
- Design: Bayonet (offset) shaft for a clear line of sight
- Material: Medical grade stainless steel
- Tips: Fine, non stick coated to prevent sticking and charring
- Insulation: Insulated shaft, current flows only through the tipsĀ
- Connector: European pattern bipolar connectorĀ
- Compatibility: Standard bipolar generators with identical cable
- Sterilization: Steam autoclavable & reusableĀ
- Applications: Neurosurgery, ENT, spine, ophthalmic, plastic and gynecological surgery
European Bipolar Forceps Bayonet Angled
European bipolar angled forceps bayonets are surgical precision cutting and sealing forceps designed for bipolar coagulation of small vessels and tissue. The offset bayonet shaft helps to keep the surgeon's hand out of sight, and the angled tips provide easy access in deeper or narrower surgical fields. European bipolar forceps bayonet angled models are supplied by Capasee Electro Medical Engineering to hospitals, clinics, and distributors in Pakistan.Ā
Specifications:
- Type: Bipolar coagulation forcepsĀ
- Design: Bayonet shaft with angled tip
- Material: High grade stainless steelĀ
- Tip coating: Non stick, reduces tissue sticking and charring
- Current path: Bipolar; the energy circulates between the two tips
- Connector: European pattern bipolar connectorĀ
- Compatibility: Uses typical bipolar cables and generators with the same connector
- Sterilization: Reusable and autoclavableĀ
- Applications: Neurosurgery, ENT, plastic and reconstructive surgery, gynecology
European Bipolar Forceps Straight
European bipolar forceps with a straight configuration are medical instruments that may be used repeatedly to cut, divide, and coagulate small vessels and tissue. The straight tip of European bipolar forceps straight provides a clear view and control in fine work. Capex Electro Medical Engineering is the supplier of the same in Pakistan.Ā
Key Specifications
- Product: European Bipolar Forceps Straight
- Function: Bipolar coagulation and haemostasis
- Tip Design: Straight
- Material: Medical grade stainless steelĀ
- Tip Finish: Doesn't stick to tissues, is non stickĀ
- Insulation: Insulated shaft, current flows only between the tips
- Connection: Standard bipolar cable, works on most bipolar generators
- Sterilization: Autoclavable and reusableĀ
- Used In: ENT, gynaecology, general, plastic, and neurosurgery.Ā
- Supplier: Capasee Electro Medical Engineering
European Bipolar Forceps Straight Non Stick
The European bipolar forceps straight non stick are a sterilizable surgical tool that is used in conjunction with a bipolar electrosurgical unit to achieve accurate coagulation and control of bleeding. The non stick coating ensures that the tips won't adhere to tissue, thus maintaining a clean surgical field. It fits in hospitals, clinics, and operating rooms in Pakistan.
Specifications:
- Type: Bipolar coagulation forceps, straightĀ
- Tip coating: Non stick, decreases tissue sticking and charringĀ
- Connector: Bipolar fitting with 2 pins, for use in Europe
- Material: Insulated stainless steel body and shaft.Ā
- Length: Approx. 19 to 20 cm (varies by model)
- Tip width: Available in different sizes (confirm required size)Ā
- Sterilization: Reusable and Steam autoclavableĀ
- Compatibility: Bipolar generators with a European 2 pin outputĀ
- Applications: For surgeries that require fine coagulation, such as general surgery, ENT surgery, gynecology, etc.Ā
- Supplied by: Capasee Electro Medical Engineering
European Non Stick Bayonet Bipolar Forceps
A European non stick bayonet bipolar forceps are a tool for precise coagulation of small vessels and delicate tissues. Non stick tips prevent charring and sticking to tissues, and the angled bayonet shaft ensures that your hand is out of the way. They are reusable and autoclavable and are suitable for neurosurgery, ENT, plastic surgery, and gynecology. Available from Capasee Electro Medical Engineering in Pakistan.
Specifications:
- Type: Bipolar coagulation forcepsĀ
- Style: European pattern bayonet shaftĀ
- Tip Coating: Non stick, anti adhesionĀ
- Material: Medical grade stainless steelĀ
- Tip Size: Multiple options availableĀ
- Length: Multiple options availableĀ
- Connector: Standard bipolar cable, matched to your generator
- Sterilization: AutoclavableĀ
- Reusability: Reusable with proper cleaning and care
- Applications: Neurosurgery, ENT surgery, plastic and reconstructive surgery, gynecology, microsurgery
- Supplier: Capasee Electro Medical Engineering