Baby Incubator Digital Control – Neonatal Care Equipment
A device used to maintain a stable, warm, and humid environment for the premature and low birth weight infant in a digitally controlled neonatal baby incubator. It is designed for hospitals, NICUs, and maternity clinics and features automated temperature control as well as safety alarms for stable care of newborns even in the event of fluctuating power supplies.
Specifications:
- Control System: Microprocessor based digital control and LED display
- Temperature Range: 28°C to 37°C (adjustable air/skin mode)
- Temperature Accuracy: ±0.1°C to ±0.2°C
- Humidity Control: (30% – 90% RH) Adjustable
- Hood Type: Dual wall acrylic canopy, which is heat retaining
- Access Ports: More than one hand port and side access doors
- Alarm System: Audio visual alarm for high/low temperature, sensor failure, and power fault
- Power Supply: 220-240V AC, with tolerance for voltage fluctuation
- Mattress Tray: Adjustable tilt (Trendelenburg/reverse Trendelenburg)
- Mobility: Castor wheels with lock, adjustable height stand
- Oxygen Port: Available for supplemental oxygen supply
- Warranty: 1 to 2 Years
BT-500 Infant Incubator – Advanced Neonatal Care by Capasee
A closed care neonatal incubator for clinics and hospitals, with precise temperature and humidity control for premature and low birth weight babies, with alarm safety and battery backup for power outages. The BT-500 infant incubator provides reliable support for neonatal care.
Specifications:
- Control Modes: Air mode and Skin (servo) mode
- Temperature Range: 20°C – 37°C
- Temperature Accuracy: ±0.2°C
- Humidity Control: 30% – 90% RH, adjustable
- Hood: Transparent acrylic with access ports
- Alarms: Power failure, sensor disconnect, high/low temperature
- Control Panel: Password protected digital display
- Power Supply: 220V AC ±10%, 50Hz
- Battery Backup: Built in, for short power outages
- Mattress Tray: Adjustable, with X-ray cassette tray
- Mobility: Lockable casters
- Dimensions: 110 x 60 x 150 cm (approx.)
- Net Weight: 65 kg (approx.)
- Warranty: 1 year (standard)
Infant Radiant Warmer HKN 90 | Capasee Pakistan
This is a servo controlled infant radiant warmer HKN 90, for newborn resuscitation, stabilization, and thermal care in hospitals and maternity units. Infrared heating and digital temperature control ensure warmth and regulation of newborns during crucial early care.
Key Specifications
- Heating Mode: Skin sensor controlled (servo) and manual control
- Heat Source: Water heater with quartz/ceramic heating element
- Temperature Control Range: Adjustable skin temperature set point (typically 35°C–37.5°C)
- Display: Digital display of skin temperature, set temperature, & heater output
- Alarms: Audible/visual alarms for sensor failure, over temperature, and power failure
- Mattress Tray: Trendelenburg/reverse Trendelenburg tilt height adjustable
- Power Supply: 220–240V AC, 50Hz (standard hospital mains)
- Accessories: Resuscitation shelf, oxygen cylinder holder, IV pole, drawer/storage unit
- Mobility: Castor wheels, locking for easy repositioning
- Hood/Canopy: Clear hood that allows monitoring to be seen through
Infant Radiant Warmer YDW II – Capasee Electro Medical
The radiant warming unit for newborn temperature stabilization is a ceramic infrared emission radiant warming system with adjustable output and full position control, which can be used for temperature regulation in labour rooms and NICUs. The infant radiant warmer provides controlled thermal support for newborns requiring stabilization.
Specifications:
- Heat source: Ceramic plate, far infrared radiant heater
- Heater output: Adjustable, for precise warmth control
- Radiant box angle: Adjustable to direct heat as needed
- Radiant box height: Adjustable to suit bassinet position and staff access
- Mobility: Caster wheels, lockable for stability during use
- Use setting: Labor rooms, delivery rooms, NICU/neonatal care units
Manual Baby Incubator YP100 – NSL Model | Capasee
The manual baby incubator YP100 is an incubator for thermal management that is designed for hospitals and maternity care centres where hands on control of temperature is important and reliable. It is easy to operate, maintain, and service locally, as its manual design is simple.
Specifications:
- Control Type: Manual dial based thermostat
- Temperature Control: Adjustable manual warming range
- Humidity: Natural air circulation (non automated)
- Hood: Double walled transparent acrylic canopy
- Air Circulation: Built in adjustable fan for even heat distribution
- Safety Alarm: Overheat warning alarm
- Mattress Tray: Sliding access tray for easy infant access
- Power Supply: Normal AC power line
- Build: Durable, low maintenance frame
- Ideal Use: Maternity wards, NICUs, and small to mid sized clinics