Our Shop
Canadian Solar 445W CS3W-445MS Panel
Laminated monocrystalline PERC solar panels designed to withstand the heat, humidity and load shedding in Pakistan and powered by 144 half cut cells. The Canadian Solar 445W CS3W-445MS Panel is ideal for residential, commercial, and medical applications where space is limited and reliability is crucial.
Specifications:
- Rated Power (Pmax): 445W
- Module Efficiency: 20.1%
- Optimum Operating Voltage (Vmp): 40.3 V
- Optimum Operating Current (Imp): 11.05 A
- Open Circuit Voltage (Voc): 48.5 V
- Short Circuit Current (Isc): 11.59A
- Cell Type: Monocrystalline PERC, half cut, 144 cells
- Max System Voltage: 1500V (IEC/UL)
- Operating Temperature: -40°C to +85°C
- Frame: Corrosion resistant anodized aluminium
- Glass: Anti reflective, low iron tempered glass
- Warranty: 12 year product, 25 year linear power output (see retailer for details)
Znshine Solar ZXP6-72-330/P Solar Panel
The panel is a 330W polycrystalline solar panel, having a 72 cell configuration, designed to ensure power generation in domestic, corporate, and small commercial applications in Pakistan daily, with the reliability of the Znshine Solar ZXP6-72-330/P solar panel.
Specifications:
- Model: ZXP6-72-330/P
- Rated Power: 330W
- Cell Type: Polycrystalline silicon
- Cell Configuration: 72 cells
- Frame: Corrosion resistant anodized aluminum
- Glass: Anti reflective, high transmission tempered glass
- Junction Box: IP68 rated, weatherproof
- Operating Temperature Range: Approx. -40°C to 85°C
- Product Warranty: Typically 10 to 12 years (confirm with supplier)
- Power Output Warranty: Typically 25 years linear performance
- Suitable Use: Residential, office backup, small clinics, distributor stock
Longi 435W Mono PERC Solar Panel LR4-72HPH
72 Half Cut 240W PV Modules for stable performance in Pakistan's weather conditions, optimized for residential, commercial, and medical facilities with net metering or hybrid backup systems using the Longi 435W Mono PERC Solar Panel LR4-72HPH.
Specifications
- Power output: 435W
- Cell type: Monocrystalline PERC, half cut, 144 half cells
- Module efficiency: 20%
- Dimensions: 2094mm x 1038mm x 35mm
- Weight: 23.5 kg
- Frame: Anodized aluminum alloy
- Glass: Tempered, low iron front glass
- Power tolerance: Positive (0 to +3%)
- Degradation: Low first year light induced degradation (LID)
- Warranty: Materials/workmanship warranty plus extended linear power output warranty (confirm exact years on your invoice/datasheet, as terms can vary by batch)
- Ideal for: On grid, off grid, and hybrid solar systems with battery backup
Trina Tallmax Solar Panels
Trina Tallmax solar panels are high output monocrystalline PERC solar modules developed to deliver consistent power output in residential, commercial, and healthcare applications in Pakistan. In addition to being multi busbar, these cells are also half cut cells, which helps them produce a steady output under partial shade or dusty conditions, which is common in the country, and they are designed to overcome the issue of load shedding and voltage fluctuations with the performance of Trina Tallmax solar panels.
Specifications:
- Cell type: Monocrystalline PERC (Passivated Emitter Rear Cell)
- Technology: Multi busbar (MBB) with half cut cell design
- Power output: Up to 400W+ per panel (varies by model)
- Power tolerance: Positive tolerance; actual output meets or exceeds nameplate rating
- Product warranty: 10–12 years against manufacturing defects
- Power warranty: 25 year linear power output warranty
- Certifications: IEC61215 / IEC61730 / UL1703 (safety and performance tested)
- System voltage: 1500V rated (compatible with standard rooftop and ground mount racking)
- Frame: Anodized aluminum frame with tempered glass front
- Low light performance: Enhanced output in early morning, cloudy, and shaded conditions
Jinko 535W Tiger Pro 72HC Mono Solar Panel
The Jinko 535W Tiger Pro 72HC is a high efficiency monocrystalline solar panel ideal for residential, commercial, and office applications throughout Pakistan. The Jinko 535W Tiger Pro 72HC mono solar panel is constructed using half cut cells and a sturdy frame, allowing for high power output in high temperatures and low light levels, which makes it a dependable solution to lower reliance on grid electricity and load shedding backup solutions.
Specifications:
Power Output: 535W Cell Type: Monocrystalline PERC, Half Cut (72 cells / 12 busbar) Module Efficiency: Approx. 20.8%–21% Voltage at Max Power (Vmp): Approx. 41.5V Current at Max Power (Imp): Approx. 12.9A Open Circuit Voltage (Voc): Approx. 49.5 V Short Circuit Current (Isc): Approx. 13.7A Dimensions: Approx. 2278 x 1134 x 35 mm Weight: Approx. 27.5 kg Frame: Anodized aluminum alloy, corrosion resistant Glass: High transmission tempered glass, 3.2mm Temperature Coefficient: Low degradation in high heat (typically 0.35%/°C) Protection: Anti PID technology, IP68 rated junction box Warranty: 12 year product warranty, 25 year linear power output warranty Certifications: IEC, TUV (standard for Jinko Tiger Pro series)
Inverex 180W INV-MONO PERC Solar Panel
A monocrystalline PERC solar panel for use in homes, clinics, and offices that require reliable backup power during load shedding. Constructed using high efficiency cells and PID/LID protection for long life in the Pakistani climate. The Inverex 180W INV-MONO PERC Solar Panel is designed to support reliable energy needs in different environments.
Specifications:
- Power Output: 180W
- Cell Type: Monocrystalline PERC (black silicon)
- Efficiency: 21%
- Voltage at Max Power (Vmp): 18–20V (typical for 12V systems)
- Open Circuit Voltage (Voc): 21 to 22V
- Current at Max Power (Imp): 9 to 10A
- Technology: Anti PID, Anti LID (tested to IEC 62804)
- Certifications: IEC 61215, IEC 61730
- Grade: Tier 1, A Grade cells, no micro cracks
- Warranty: 25 year performance warranty
- Ideal Use: Small inverters, UPS backup, DC lighting, fans, small load setups
Inverex 150W Poly Inverperfect INV-150 Solar Panel
A dependable polycrystalline solar panel designed for residential and small business applications in Pakistan to lower reliance on the grid and maintain essential operations during load shedding, and for small businesses and homes that want to decrease their reliance on electricity. The Inverex 150W Poly Inverperfect INV-150 Solar Panel is a suitable choice for users looking for reliable backup support.
Specifications:
- Model: Inverperfect INV-150
- Power Output: 150 Watts
- Cell Type: Polycrystalline
- Open Circuit Voltage: 18 to 22 V
- Working Voltage: 17 to 18 V
- Frame Material: Anodized aluminum (corrosion resistant)
- Front Layer: Tempered glass (hail and impact resistant)
- Junction Box Rating: IP65 (dust and water resistant)
- Compatibility: Standard 12V inverter/UPS systems
- Ideal For: Homes, shops, offices, small DC pumps
- Brand Origin: Capasee (Pakistan)
Cheetah Plus HC 78M 400W Solar Panel
The Cheetah Plus HC 78M solar panel is a 400W half cut solar panel designed for consistent performance under the Pakistani climate, dust, and load shedding. The Cheetah Plus HC 78M 400W solar panel provides ample power in low light or partially shaded situations, which makes it a good option for homes, clinics, and offices that require reliable backup lighting.
Specifications:
- Power Output: 400W
- Cell Type: Monocrystalline, half cut (HC)
- Cell Configuration: 78 cells
- Technology: Anti PID design to reduce long term degradation
- Frame: Durable anodized aluminum frame
- Glass: Tempered, impact, and weather resistant
- Performance: Improved low light and high temperature performance
- Expected Lifespan: Gradual and minimal degradation over 25+ years
- Ideal For: Housing, offices, clinics, and wholesalers all over Pakistan
Solar CS3W-445MS 445W Mono Panel
High efficiency Solar CS3W-445MS 445W Mono Panel monocrystalline solar panel with reliability for homes, offices, and small business households in Pakistan during load shedding and voltage fluctuations, offering dependable performance for modern energy needs.
Specifications:
- Power Output (Pmax): 445W
- Module Efficiency: 20.1%
- Cell Type: Monocrystalline PERC, 144 half cut cells
- Optimum Operating Voltage (Vmp): 40.9V
- Optimum Operating Current (Imp): 10.89A
- Open Circuit Voltage (Voc): 48.9 V
- Short Circuit Current (Isc): 11.54A
- Power Tolerance: 0 to +10W
- Temperature Coefficient (Pmax): -0.35%/°C
- Max System Voltage: 1500V / 1000V (IEC/UL)
- Dimensions (approx.): 2,094mm x 1,038mm x 35mm
- Certifications: IEC 61215, IEC 61730
- Frame: Anodized aluminum, rated for high wind and snow load
- Glass: Anti reflective, anti soiling coating
BT-500 Infant Incubator – Advanced Neonatal Care by Capasee
A closed care neonatal incubator for clinics and hospitals, with precise temperature and humidity control for premature and low birth weight babies, with alarm safety and battery backup for power outages. The BT-500 infant incubator provides reliable support for neonatal care.
Specifications:
- Control Modes: Air mode and Skin (servo) mode
- Temperature Range: 20°C – 37°C
- Temperature Accuracy: ±0.2°C
- Humidity Control: 30% – 90% RH, adjustable
- Hood: Transparent acrylic with access ports
- Alarms: Power failure, sensor disconnect, high/low temperature
- Control Panel: Password protected digital display
- Power Supply: 220V AC ±10%, 50Hz
- Battery Backup: Built in, for short power outages
- Mattress Tray: Adjustable, with X-ray cassette tray
- Mobility: Lockable casters
- Dimensions: 110 x 60 x 150 cm (approx.)
- Net Weight: 65 kg (approx.)
- Warranty: 1 year (standard)
Baby Incubator Digital Control – Neonatal Care Equipment
A device used to maintain a stable, warm, and humid environment for the premature and low birth weight infant in a digitally controlled neonatal baby incubator. It is designed for hospitals, NICUs, and maternity clinics and features automated temperature control as well as safety alarms for stable care of newborns even in the event of fluctuating power supplies.
Specifications:
- Control System: Microprocessor based digital control and LED display
- Temperature Range: 28°C to 37°C (adjustable air/skin mode)
- Temperature Accuracy: ±0.1°C to ±0.2°C
- Humidity Control: (30% – 90% RH) Adjustable
- Hood Type: Dual wall acrylic canopy, which is heat retaining
- Access Ports: More than one hand port and side access doors
- Alarm System: Audio visual alarm for high/low temperature, sensor failure, and power fault
- Power Supply: 220-240V AC, with tolerance for voltage fluctuation
- Mattress Tray: Adjustable tilt (Trendelenburg/reverse Trendelenburg)
- Mobility: Castor wheels with lock, adjustable height stand
- Oxygen Port: Available for supplemental oxygen supply
- Warranty: 1 to 2 Years
Infant Radiant Warmer YDW II – Capasee Electro Medical
The radiant warming unit for newborn temperature stabilization is a ceramic infrared emission radiant warming system with adjustable output and full position control, which can be used for temperature regulation in labour rooms and NICUs. The infant radiant warmer provides controlled thermal support for newborns requiring stabilization.
Specifications:
- Heat source: Ceramic plate, far infrared radiant heater
- Heater output: Adjustable, for precise warmth control
- Radiant box angle: Adjustable to direct heat as needed
- Radiant box height: Adjustable to suit bassinet position and staff access
- Mobility: Caster wheels, lockable for stability during use
- Use setting: Labor rooms, delivery rooms, NICU/neonatal care units
Infant Radiant Warmer HKN 90 | Capasee Pakistan
This is a servo controlled infant radiant warmer HKN 90, for newborn resuscitation, stabilization, and thermal care in hospitals and maternity units. Infrared heating and digital temperature control ensure warmth and regulation of newborns during crucial early care.
Key Specifications
- Heating Mode: Skin sensor controlled (servo) and manual control
- Heat Source: Water heater with quartz/ceramic heating element
- Temperature Control Range: Adjustable skin temperature set point (typically 35°C–37.5°C)
- Display: Digital display of skin temperature, set temperature, & heater output
- Alarms: Audible/visual alarms for sensor failure, over temperature, and power failure
- Mattress Tray: Trendelenburg/reverse Trendelenburg tilt height adjustable
- Power Supply: 220–240V AC, 50Hz (standard hospital mains)
- Accessories: Resuscitation shelf, oxygen cylinder holder, IV pole, drawer/storage unit
- Mobility: Castor wheels, locking for easy repositioning
- Hood/Canopy: Clear hood that allows monitoring to be seen through
Laparoscopic Electrode for Electrosurgical Use
Surgical tool that is used with an electrosurgical unit (ESU) in a laparoscopic procedure to cut, coagulate and dissect tissue. This laparoscopic electrode delivers energy with minimal thermal spread for precise delivery, leading to safer, faster surgical outcomes in general, gynecological, gall bladder and hernia laparoscopy.
Specifications:
- Type: Monopolar / Bipolar (specify as applicable)
- Shaft Length: 330 mm / 450 mm (common OT sizes)
- Shaft Diameter: 5 mm
- Tip Style: Hook, spatula, or L hook (per procedure requirement)
- Insulation: Full length shaft insulation to prevent stray current leakage
- Material: Surgical grade stainless steel
- Compatibility: Standard electrosurgical generators (most ESU brands)
- Sterilization: Autoclavable, reusable up to multiple sterilization cycles
- Usage Type: Reusable / Single use options available
- Connector: Standard ESU cable connector
Push Button Control Switch
A manual switching device that is designed to start, stop, or control machinery and electrical circuits using push button control. Designed for factory panels, generator changeover, and equipment where a fast and reliable manual operation is required. Designed to address Pakistan's range of power supplies and the rigours of workshop applications with push button control.
Specifications:
- Type: Momentary and maintained contact options available
- Actuator Colors: Red, green, yellow, black (customizable per function)
- Panel Cutout Size: 22 mm and 16 mm standard fittings
- Protection Rating: IP65 available for dust and moisture resistance
- Wiring: Screw terminal connection for easy installation
- Contact Configuration: 1 NO / 1 NC (normally open / normally closed), higher configurations available on request
- Voltage Rating: Suitable for standard AC control circuits with fluctuation tolerance
- Operating Temperature: Rated for high heat industrial environments
- Mounting: Panel mount, standard control box compatible
- Body Material: Impact resistant plastic or metal housing (depending on variant)
- Application: Motors, conveyors, pumps, exhaust fans, generator panels, industrial machinery
Bipolar Forceps Cable for Electrosurgery
A cable with a bipolar forceps cable attachment is to be used with the electrosurgical generator for the exactness of tissue coagulation during surgery. Constructed with autoclave safe insulation and a rugged connector for daily use in the OT.
Specifications:
- Type: Bipolar electrosurgical cable
- Connector: Dual pin bipolar connector (standard fit for major generator brands)
- Cable Length: 3 meters (approx.)
- Insulation Material: Medical grade silicone
- Sterilization: Autoclavable up to 134°C
- Reusability: Can have multiple sterilization cycles because it is reusable
- Compatibility: Standard bipolar forceps and electrosurgical generators
- Voltage Rating: Electrosurgical generator output stable with varying input power
- Packaging: Individually packed, sterile/non sterile available
- Country of Origin/Supply: Pakistan (locally supported by Capasee Electro Medical Engineering)
Bipolar Electrosurgical Forceps
Surgical bipolar electrosurgical forceps that are reusable and precise for the controlled grasping and electrosurgical coagulation of tissue. Ideal for ENT, gynaecology, general surgery, and laparoscopy, where accurate hemostasis with minimal thermal spread is required using bipolar electrosurgical forceps.
Specifications:
- Material: Surgical grade stainless steel
- Tip Type: Straight/curved/bayonet (available in multiple configurations)
- Insulation: Fully insulated shaft to prevent current leakage
- Compatibility: Works with standard bipolar electrosurgical generators
- Sterilization: Autoclavable, reusable up to multiple sterilization cycles
- Length: Available in standard OT lengths (typically 180–200 mm)
- Handle: Ergonomic grip for reduced fatigue during long procedures
- Current Path: Bipolar (current flows only between tips, no patient return pad needed)
- Application: Cutting, coagulation, and precise hemostasis in open and minimally invasive surgery
Electrosurgical Pad | Medical Patient Return Plate
Return electrode for monopolar electrosurgical use, designed for single use as an electrosurgical pad. It can cover the existing path safely between the patient and the electrosurgical generator and thus reduce the risk of burns during surgery with an electrosurgical pad.
Specifications:
- Type: Split pad, REM (Return Electrode Monitoring) compatible
- Material: Latex free, hypoallergenic adhesive gel
- Backing: Flexible, conformable non woven backing
- Adhesive: Conductive hydrogel with strong, skin safe tack
- Sterility: Individually sealed, single patient use
- Shelf life: Typically 2–3 years from manufacture (check batch label)
- Compatibility: Works with standard monopolar electrosurgical generators
- Packaging: Available in boxes for bulk hospital/clinic ordering
Bipolar Hand Controller
Switching accessories for bipolar electrosurgical generators with hand operation. It allows the surgeon to control coagulation or cutting from the hand piece without the need for a foot pedal, allowing for a more focused operation with a reliable bipolar hand controller solution.
Specifications:
- Type: Bipolar hand activated control switch
- Compatibility: Standard bipolar electrosurgical generator interface
- Activation Mode: Manual push button (coagulation/cutting)
- Housing Material: Medical grade, autoclavable
- Sterilization: Autoclave compatible
- Cable: Durable, flexible, high cycle rated jacket
- Power Stability: Reliable performance under fluctuating voltage conditions
- Grip Design: Lightweight, ergonomic for extended procedure use
- Manufacturer: Capasee Electro Medical Engineering
Bipolar Foot Switch for Electrosurgical Use
Electrosurgical generators with a pedal operated control device activate the bipolar cutting and coagulation modes without the operator having to leave the operating field, making the bipolar foot switch an essential control accessory during surgical procedures.
Specifications:
- Type: Dual pedal bipolar activation (separate cut and coagulation controls)
- Housing: Sealed, spill and fluid resistant casing for OT environment
- Base: Non slip rubberized underside for stability on smooth floors
- Switch rating: High cycle microswitches used every day during clinical operations
- Connector: Standard compatibility with common electrosurgical generator ports
- Design: Low level, compact footprint to reduce OT floor clutter
- Build: Designed to operate for extended periods and multiple operations as needed
- Bipolar Foot Switch for Electrosurgical Use